How to fix no healthy upstream error


What is the no healthy upstream error?

The “no healthy upstream” error is a message you may see when trying to run a Docker container. This error means that the container you are trying to run does not have a valid network connection to its required resources. In order to fix this error, you will need to determine what resources the container needs in order to function properly and make sure that those resources are accessible to the container.

What causes the no healthy upstream error?

The “no healthy upstream” error is most commonly caused by one or more of the following: -An upstream server is not responding -A firewall is blocking access to the upstream server -The web server’s configuration is not set up correctly

How to fix the no healthy upstream error?

The “no healthy upstream” error is usually caused by a misconfiguration in your NGINX configuration file. This error can be fixed by editing your NGINX configuration file and adding the correct upstream server configurations.

Check your nginx configuration


If you are seeing the “no healthy upstream” error in your nginx logs, it means that nginx is unable to connect to any of the upstream servers that you have configured. There are a few possible causes for this:

  1. The upstream server(s) may be down.
  2. There may be a problem with your nginx configuration.
  3. There may be a problem with your DNS configuration.

To resolve this issue, you will need to check each of these possibilities in turn.

  1. The upstream server(s) may be down:

First, check to see if the upstream server(s) that you are trying to connect to are actually up and running. If they are not, then there is nothing that nginx can do to resolve the issue – you will need to start the server(s) before nginx will be able to connect to them.

  1. There may be a problem with your nginx configuration:

Next, check your nginx configuration to make sure that it is correct. If you have recently made changes to your nginx configuration, it is possible that you made a mistake which is preventing nginx from connecting to the upstream servers. To check your configuration, run the following command: ‘nginx -t’ This command will test your nginx configuration for errors and warnings. If there are any problems, they will be displayed on the screen and you will need to fix them before proceeding.

  1. There may be a problem with your DNS configuration: Finally, if both of the above solutions fail, it is possible that there is a problem with your DNS configuration. In some cases, nginx may be unable to resolve the hostnames of your upstream servers due to an incorrect DNS setup. If this is the case, you will need to update your DNS entries so that they point to the correct IP addresses of your servers.”
    Check your server’s DNS settings
    Before you start, check your server’s DNS settings. The “no healthy upstream” error can occur if your server is configured to use the wrong DNS servers. To check your DNS settings, open the /etc/resolv.conf file on your server and make sure the DNS servers listed are correct.
    Check your server’s firewall settings
    If you see the “no healthy upstream” error, this means that your server’s firewall is blocking communication with our logging agent. To fix this, you’ll need to add an allow rule for our IP addresses on your server’s firewall.

Leave a Reply

Your email address will not be published.